NTT DATA - Trusted Global Innovator

NTT DATA ENGINEERING SYSTEMS Corporation

Space-E  Space-E/CAM

ExtendPost

Support for Heidenhain

Support for Heidenhain

For a 3-axis path created on Space-E/CAM, NC data available for a controller provided by Heidenhain can be output.

- Supported control examples -
- Line segment (L), circular arc command (CC)
- Diameter correction command (RL, RR)
- Drilling fix cycle command (CYCL DEF)
- Indexing machining command (PLANE)

Support for Siemens

For a 3-axis path created on Space-E/CAM, NC data available for a controller provided by Siemens can be output.

5Axis

Convert 3axis to 5axis

Convert 3axis to 5axis

Easily convert 3axis tool path to 5axis.
You can select the 3-axis path freely that is the basis for the conversion.
Abundant tool attitude modes are available to support various machining patterns.

5axis finishing

5axis finishing

For a set model shape, a 5-axis path with reference to a specified direction is created.
It can be also created in consideration of undercutting parts.

5axis Free Shape

5axis Free Shape

For a specified wire shape on a surface, a path following the surface can be created.
In addition, the shape can be processed from a direction perpendicular to it.

Short Tool Length

Short Tool Length

Because a tool axis is inclined, a shape can be processed at a short projecting length.

Roughing

Roughing

When driving is set, a 5-axis path for rough finishing can be created.

Flat Part Recognition

Flat Part Recognition

Recognize flat part and cut by flat tool.

Postprocessor for 5-axis

Postprocessor for 5-axis

You can easily set whether tool endpoint control is used and how many decimal places are specified.
These settings support the FANUC and Heidenhain controller formats.

Machine Simulation

Machine Simulation

Machine simulation is implemented.
In addition, you can check interference among model shapes, tools, and machine tools.