NTT DATA - Trusted Global Innovator

NTT DATA ENGINEERING SYSTEMS Corporation

Space-E  Space-E/Modeler

Providing flexible modeling environment together with surface and solid functions.

Solid modeling provides a command used to place a basic solid shape easily, a command used to create a solid from a 2D shape, or a command used to add or subtract solid shapes mutually.

Our surface modeling is the best in market and will enable creation and edit of complex free form shape for automotive and home electronics parts.

Solid Functions

Remove Face

Remove Face

When you specify a part of an item consisting of solids, this function can change its shape as if the surface of the part is removed.

Fillet

Fillet

Fillet between face and face can create fillet face over the edges.

Boolean Implant

Boolean Implant

Sheet body can be implanted to solid body other than standard boolean operation such as unite, subtract and intersect.

Boolean Difference

Boolean Difference

Easy to create mold shape by using solid subtract operation.

Add Thickness

Add Thickness

Add thickness to solid body. Different thickness value can be applied.

Auto Healing

Auto Healing

Create solid body automatically from complex surfaces.

Surface Functions

Surface Matching

Surface Matching

Matching neighbor surfaces considered normal vector, tangent vector and curvature.

Sweep Surface

Sweep Surface

Create sweep surface along to normal vector of tangent vector.

Surface Extension

Surface Extension

Extend surface along to tangent or curvature direction.
Surface extension can be applied to trimmed surface too.

Trim By Area

Trim By Area

Composite curves or edges can trim complex surface or solid model.

Parting Face

Parting Face

There are three kind of parting face commands.

Fillet

Fillet

Variety of fillet commands are ready for many situations.

Other Functions

Split Cavity & Core

Split Cavity & Core

Split "Cavity side face" and "Core side face" can apply to surface and solid model.

Rotate Sections

Rotate Sections

Rotate surface sections by base edge and rotation angle.

Electrode

Electrode

Automatic creation of electrode model and drawing.

Unfolding Flange

Unfolding Flange

Create flange shape by easy operation.

Drawing

Drawing

Semi automatic creation of 2D drawing from 3D model. There are function-rich dimension commands to finish drawing.

Plot Point On Curve

Plot Point On Curve

Create points on curves according to measured actual length.